Table of Contents
Advertisement
3
3.6.1
Console
ITEM
VALUES
Scroll
Software
Track
Virt
Both (*)
Contrast
Ranged: 0..127 (65)
Light
always on (*)
5s, 10s, 15s, 30s, 1m,
2m, 3m, 5m, 10m,
15m, 30m
Intensity
Low
High (*)
Kbd click
Enable (*)
Disable
Kbd freq.
Ranged: 1..100 (3)
Password
String up to 8
characters
Scrolling Mode
The Formula Color™ display adapter allows the application to write on a virtual 25
lines by 80 columns display. On the other hand, the user can see only a portion of
this virtual display at a time, which we call the physical display.
The "scroll" parameter controls which portion of the virtual display is seen by the
user. The display can always be scrolled by the application program.
Software: the physical display position is fixed. It can be moved only by the
application program.
Track:
the physical display follows the cursor vertically only through BIOS.
Virt:
it is only possible to scroll the display by the keyboard.
Both:
Both the Virtual and Track mode are enabled.
Contrast
The CMOS value of LCD contrast represents the only parameter that can be
modified outside the BSETUP.EXE application. As a matter of fact, selecting the
contrast mode [FUNC]-[4] gives you the ability to change this value using the up and
down arrows; this changing does not affect the EEPROM value.
14
DESCRIPTION
Scrolling mode
LCD contrast
Timeout for the
backlight
Backlight intensity
Keyboard click
Keyboard click
Frequency
(100 Hz steps)
Selection of the new
password
to
enter
setup
FORMULA COLOR™
NOTE
See Scrolling Mode
note below
See
Contrast
below
Simply press
[ENTER] to disable
the password
note
Advertisement
Table of Contents
