Table of Contents
Advertisement
4
4.2
BARCODE SCANNING
To scan barcodes, point the Formula Color™ terminal laser beam onto the code from
within its readable range while pressing the [SCAN] key. See reading diagram in par.
7.3. The lighted band emitted by the laser must completely intercept the barcode as
shown in the figure below. The terminal LED, the emission of an acoustic signal, and
the green spot will indicate that the scan has taken place correctly.
Figure 8 – Formula Color™ Terminal Scanning a Barcode
The heat that can be felt in the area of the battery pack is not a
symptom of a malfunction; rather, it is a normal state due to the
Formula Color™ terminal being in use.
NOTE
22
NO
OK
FORMULA COLOR™
NO
OK
Advertisement
Table of Contents
