Connection To The Host Computer; Rs232 Connection Via Cradle - Datalogic Formula Color User Manual

Hide thumbs Also See for Formula Color:

Table of Contents

3 2

2.2

CONNECTION TO THE HOST COMPUTER

Before continuing with this phase be sure both the computer and

the F-Color cradle are turned off.

CAUTION

2.2.1

To connect the F-Color single cradle to the host computer proceed as follows:

1 - Connect the cable to the serial port of the host computer;

2 - Connect the other end of the same cable (RJ connector) to the RS232 port of

the cradle;

3 - Insert the power-supply plug into the outlet on the base of the cradle;

4 - Attach the power supply to a power outlet;

5 - Turn on the computer;

6 - Put the Formula Color™ terminal into its cradle.

Key:

A) Host Computer

B) F-Color Single Cradle

C) Power Supply

Figure 6 – RS232 Cradle Connection

FORMULA COLOR™

Table of Contents