Table of Contents
Advertisement
The terminal can communicate with an access point sharing the same parameter
values.
By default WEP is not activated, default values of the net.cfg parameters are:
ESS_ID tsunami
Encrypt_Enable N
Encrypt_Key_Index 1
Encrypt_Key1 11 11 11 11 11 11 11 11 11 11 11 11 11
Encrypt_Key2 22 22 22 22 22 22 22 22 22 22 22 22 22
Encrypt_Key3 33 33 33 33 33 33 33 33 33 33 33 33 33
Encrypt_Key4 44 44 44 44 44 44 44 44 44 44 44 44 44
8)
edit the socket.cfg file to configure the TCP/IP protocol:
The most significant parameters are listed below:
IP address
route add default if0
domain server
IP address is the terminal IP address, route add default if0 configures
the default Gateway, while domain server configures the DNS.
By default IP address = 0.0.0.1 which indicates that the DHCP server is
enabled.
For further details consult the LAN administrator or qualified personnel.
The Formula Color™ radio models are now ready to be loaded with the software
application program.
xv
Advertisement
Table of Contents
