Table of Contents
Advertisement
DTPS protocol by typing ds.bat and pressing the [Enter] key to activate the
communication server. For correct communication with the terminal, it is
necessary that a client application program based on the DTP protocol is running
on PC side.
The CD-ROM provided within the packaging contains the WinDTP and DL
Mobile Configurator™ tools which allow managing and configuring the terminal
and its C: Disk. In particular, WinDTP is a software package managing the
terminal disk and its files, while DL Mobile Configurator™ allows installing and
configuring DL TCL™.
Be careful that both the Server and Client serial communication parameters
share the same value. Default parameters are: baud rate = 115000,
parity = none, stop bit = 1, data bits = 8.
The Formula Color™ batch model is now ready to be loaded with the software
application program.
Formula Color™ Radio Models Only
This terminal contains an 802.11b radio module. The net.cfg file, containing radio
configuration parameters, and the socket.cfg file, containing the TCP/IP protocol
configuration parameters, are already installed on Disk C:.
When using the Formula Color™ Wi-Fi terminal for the first time:
1)
repeat the procedure given for all Formula Color™ models from step 1 to step 6;
7)
edit the net.cfg file available in the C:\RF directory to configure the radio
parameters:
The most significant parameters are listed below:
ESS_ID
Encrypt_Enable
Encrypt_Key_Index
Encrypt_Key1
Encrypt_Key2
Encrypt_Key3
Encrypt_Key4
ESS_ID configures the Server Set Identifier (Network Name); while the other
parameters enable WEP.
xiv
Advertisement
Table of Contents
