Bios Setup Menu; General Information; Activating The Setup Procedure - Datalogic Formula Color User Manual

Hide thumbs Also See for Formula Color:

Table of Contents

BIOS SETUP MENU

3.1

The Formula Color™ terminal is very versatile and can be adapted to suit many

special requirements by configuring certain parameters which can be changed after

the Formula Color™ terminal's boot sequence.

The activities of accessing the parameters and their modification are commonly

referred to as Formula Color™ terminal setup activities.

The parameters have their default values, which are loaded automatically during the

booting sequence if the following conditions occur:

the first time the Formula Color™ terminal is booted, as initial setup of the

parameters themselves;

if, during the boot sequence, the BIOS notes that the previously-set configuration

parameters might not be complete or correct.

3.2

The BSETUP.EXE program is the only way to modify the Formula Color™ terminal

parameters. It is a normal DOS program and can be invoked after the Formula

Color™ terminal's boot sequence.

The application has the following two options:

BSETUP –C

the program checks the status of the CMOS. If the parameters are

incorrect, it asks if you want to modify them. Otherwise the program

exits. Default is no check;

BSETUP -D

with this option you can load the DEFAULT configuration.

In the NEWAUTO.BAT file it is useful to invoke "BSETUP -C", so that if for some

reasons the CMOS RAM is corrupted the user is notified.

The application does not provide a method to change date/time, since you can use

the DOS commands DATE and TIME.

Table of Contents