Use Auto Leveling To Print - IEMAI HIGH-TEMPERATURE Series Operating Instructions Manual

4.1.1 Use Auto Leveling To Print

Step 1
When starting the machine,
observe whether the automatic
leveling self-test passes. If it does
not pass, it must not be reset to
zero, otherwise there is a risk that
the platform will hit the nozzle,
resulting in machine failure.
(During the self-test, the self-test
will be performed twice. If there is
no action, manually pull out the
probe and start the self-test again)
Step 2
After passing the self-test, click
return to zero
- 20 -
Print More Materials, All For Application
Step 3
The X-axis (transverse) Y-axis
(vertical) is zeroed in turn, , and
finally the Z-axis is raised and
zeroed