Print - IEMAI HIGH-TEMPERATURE Series Operating Instructions Manual

7.3 Print

Problem 1: Prompt #1 or #2 no material, cannot print
properly
Problem 2: The print appears to be detached from the
bottom and is carried away
Problem 3: Dual head printing does not work well
together
Problem
Add material at the filament-warning test
After determining that the platform is able to print
that material, adjust the platform and nozzle gap
when the zero point is small (see Printing - Installing
the Build Platform and Leveling for more information)
Refer to the maintenance
adjustment
- 39 -
Print More Materials, All For Application
Solution
- nozzle spacing