Table of Contents
Advertisement
NOTE: These tools are manufactured without
any chemical substances that could be
dangerous to health. Potential health damage
may occur from battery liquid if batteries
are treated or disposed of improperly.
Chargers and batteries should be sorted
for environmentally friendly recycling and
disposed of separately.
NOTE: Laws regarding the disposal of all parts
must be observed.
• Chargers and batteries should be sorted for
environmentally friendly recycling.
• Observe warnings and instructions of the
battery manufacturer stated in the operating
instructions of the battery.
WARNING! Read all safety warnings and
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire
and/or serious injury. Save all warnings and
instructions for future reference.
• Always assume the stapler contains staples.
•
Do not point the stapler toward user or others.
Unexpected triggering will discharge the staple,
causing an injury.
•
Do not actuate stapler unless it is placed firmly
against the work piece. If tool is not in contact
with the work piece, the staple may be deflected
away from target.
• Use caution while removing a jammed staple.
The mechanism may be under compression and
the staple may be forcefully discharged while
attempting to free a jammed staple.
• Stapler is intended for closing boxes made from
corrugate. It is intended for stapling with staples
as specified on page 5. Only use stapler as
described in these instructions.
•
Do not use staples that are not listed on
page 5.
•
Do not place any staples into unsuitable
material.
•
Never use stapler to attach electrical cables.
•
Do not modify stapler without prior authorization
•
Never direct position guidance laser at other
people.
PAGE 2 OF 13
SAFETY
• These instructions must always be available at
the place of operation of the stapler. They must
be read and observed by all persons working
with, or in the vicinity of, the stapler.
•
Preventive and corrective maintenance on
the tool may only be carried out by trained
personnel. In addition to these instructions, the
applicable local rules for accident prevention
and safe and professional operation must be
observed.
• The operator or their supervisor is responsible for
safe stapling and the selection of the correct
staples (as specified on page 5) for the package,
depending on its dimensions, weight, stability
and the way it will be transported and stored.
• Only staples specified for the stapler type may
be used (see page 5). The stapler should be
adjusted appropriately for the staples and the
package used. The operator is responsible for
the correct tool settings and adjustments.
• When operating the tool, wear hand protection
(cut resistant gloves) and safety shoes.
• Safety goggles should always be worn by the
operator and others in the work area when
loading, operating or servicing stapler.
•
Keep the work area clean and well-lit. Cluttered
or dark areas invite accidents.
•
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks that may ignite the dust or fumes.
•
Keep children and bystanders away while
operating unit. Distractions can cause user to
lose control.
•
Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets
will reduce the risk of electric shock.
• Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. An increased risk of electric shock
can occur if body is earthed or grounded.
•
Do not expose stapler to rain or wet conditions.
Water entering stapler will increase risk of
electric shock.
0922 IH-10066
Advertisement
Table of Contents
