U-Line H-1335 Quick Start Manual

H-1335
KIHLBERG PNEUMATIC
ROLL FEED STAPLER
SAFETY WARNINGS
WARNING! Read all warnings and instructions to
prevent injuries to yourself and to others.
1. Wear eye protection when using tool. Always use
other personal protection equipment as required,
such as ear protection, hard hats, etc.
2. Never use oxygen, combustible gases, CO2, steam
or high pressure gas tanks as power sources for the
PN-version of this tool; the tool may explode and
cause serious injury. Use only dry, clean, pressure
regulated compressed air to drive the tool.
3. Always check tool before every use.
4. Always disconnect the tool from the air supply and
empty the magazine when taking a break or ending
work, when servicing the tool, troubleshooting or
repairing. Never leave a loaded tool unattended.
PAGE 1 OF 9
1-800-295-5510
uline.com
5. Always assume that the tool is loaded. Respect the
tool as potentially dangerous. Never point the tool at
yourself or anyone else, whether it contains staples
or not. Always remove finger from trigger when not
driving staples.
6. Never hold your hand or another part of your body
under the tool.
7. Position yourself in a firmly balanced position when
using or handling the tool.
8. Do not modify the tool or set it up in a jig without
manufacturer's approval.
9. Use stapler with cardboard ONLY. No other use is
permitted without the approval of the manufacturer.
Para Español, vea páginas 4-6.
Pour le français, consulter les pages 7-9.
0421 IH-1335