U-Line H-1028 Manual
  1. Manuals
  2. Brands
  3. U-Line Manuals
  4. Power Tool
  5. H-1028
  6. Manual

U-Line H-1028 Manual

Air drive carton stapler
Hide thumbs Also See for H-1028:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
PHONE 1-800-295-5510
FAX 1-800-295-5571
WEB uline.com
AIR DRIVE CARTON STAPLER
MODEL:
H-1028
MANUAL
WARNING
Before operating this stapler familiarize yourself with the safety warnings and
instructions in this manual. Keep these instructions with the stapler for future
reference. If you have any questions, contact Uline at 1-800-295-5510.
CHICAGO
MINNEAPOLIS
LOS ANGELES
NYC/PHILA
ATLANTA
DALLAS
•
•
•
•
•

Advertisement

Table of Contents
loading

Related Manuals for U-Line H-1028

Summary of Contents for U-Line H-1028

  • Page 1 PHONE 1-800-295-5510 FAX 1-800-295-5571 WEB uline.com AIR DRIVE CARTON STAPLER MODEL: H-1028 MANUAL WARNING Before operating this stapler familiarize yourself with the safety warnings and instructions in this manual. Keep these instructions with the stapler for future reference. If you have any questions, contact Uline at 1-800-295-5510.

  • Page 2: Table Of Contents

    PHONE 1-800-295-5510 FAX 1-800-295-5571 WEB uline.com Table of Contents Tool Specifications Safety Instructions Lubrication & Maintenance Air Supply & Connections Loading the Tool Checking the Staple Leg Length Clinch Adjustment Depth Adjustment Tool Operation Cleaning the tool Clearing Tool Jams Troubleshooting Teeth Replacement Driver Replacement...

  • Page 3: Tool Specifications

    PHONE 1-800-295-5510 FAX 1-800-295-5571 WEB uline.com Tool Specifications Model of Tool H-1028 ADB 18-32 Dimensions: LxHxW 13.5x8.75x6 Weight (without Fasteners) 6lbs Compressed Air: Maximum PSI: 110 psi Recommended Operating Pressure: 71-100 PSI Air Consumption: Staple Specification: S-1396 C34 Stick Staple Specification:...

  • Page 4: Safety Instructions

    PHONE 1-800-295-5510 FAX 1-800-295-5571 WEB uline.com SAFETY INSTRUCTIONS 1. Read the manual and understand all safety instructions before operating the tool. If you have questions, contact Uline at 1-800-295-5510. 2. Never use flammable gases as a power source for the stapler. Only use filtered, compressed air.

  • Page 5: Lubrication & Maintenance

    PHONE 1-800-295-5510 FAX 1-800-295-5571 WEB uline.com Lubrication & Maintenance: 1. Lubricate the stapler prior to initial operation. 2. Disconnect the stapler from the air supply prior to servicing. 3. Turn the stapler so that the inlet is facing up and put one drop of high-speed spindle oil, UNOCOL RX22, or 3-in-1 oil into air inlet.

  • Page 6: Loading The Tool

    PHONE 1-800-295-5510 FAX 1-800-295-5571 WEB uline.com Loading the Tool 1. Disconnect the air supply. 2. Pull the Pusher back until it stops on pusher pivots. Rotate pusher to position. 3. Insert 2 sticks of appropriate staples into the magazine. Let the sticks slide forward to the front of the magazine.

  • Page 7: Clinch Adjustment

    PHONE 1-800-295-5510 FAX 1-800-295-5571 WEB uline.com Staple Leg Length 1. Loosen the set screw with a 3mm Allen wrench. 2. Adjust 180° with a screw driver to the desired setting. 3. If you are using ¾” staples set L up. 4.

  • Page 8: Depth Adjustment

    PHONE 1-800-295-5510 FAX 1-800-295-5571 WEB uline.com Depth Adjustment 1. Loosen front screw with a 6mm Allen wrench. 2. Push the body up and adjust to the desired depth. 3. When the top edge of the adjustment plate is at it’s highest setting the teeth are at their shallowest penetration.

  • Page 9: Cleaning The Tool

    PHONE 1-800-295-5510 FAX 1-800-295-5571 WEB uline.com Operating Instructions Warning 1. Protect your eyes and ears. Wear: a. Safety glasses with side shields b. hearing protection. Ensure that anyone in the vicinity wears safety protection. 2. To prevent accidental injuries never place a hand or any other body part in the staple clinching area or adjustment window.
  • Page 10 PHONE 1-800-295-5510 FAX 1-800-295-5571 WEB uline.com Clearing a Jam 1. Disconnect Air Supply 2. Pull Pusher back and rotate to a locked position. 3. Insert needle nose pliers or screw driver to clear jam. 4. Slowly release Pusher back to position. Back to Top CHICAGO MINNEAPOLIS...

  • Page 11: Troubleshooting

    PHONE 1-800-295-5510 FAX 1-800-295-5571 WEB uline.com Troubleshooting Warning Stop using the tool immediately if any of the following problems occur. Serious personal injury could occur. Any repairs or replacements must be done by a qualified person or authorized service center only. Problem Cause Remedy...

  • Page 12: Teeth Replacement

    PHONE 1-800-295-5510 FAX 1-800-295-5571 WEB uline.com Teeth Replacement 1. Loosen screws and nut with an 8mm spanner and 4mm Allen wrench. 2. Remove the magazine assembly. 3. Loosen screws with 3mm Allen wrench 4. Change teeth one at a time to prevent reverse teeth. Back to Top CHICAGO MINNEAPOLIS...

  • Page 13: Driver Replacement

    PHONE 1-800-295-5510 FAX 1-800-295-5571 WEB uline.com Driver Replacement 1. Disconnect the Air Supply 2. Loosen screw and nut with a 8mm spanner wrench and a 4mm Allen wrench. 3. Remove the magazine assembly. 4. Loose the set screw with a 3mm Allen wrench to unlock the adjusting rod. 5.

  • Page 14: Pusher Spring Replacement

    PHONE 1-800-295-5510 FAX 1-800-295-5571 WEB uline.com Pusher Spring Replacement 1. Loosen the screws and nut with a 8mm Spanner wrench and a 4mm Allen wrench. 2. Remove the Magazine Assembly. 3. Pull the Pusher back until it stops on the rod, then rotate the Pusher to position.

  • Page 15: Valve & Tube O-Ring Replacement

    PHONE 1-800-295-5510 FAX 1-800-295-5571 WEB uline.com Valve & Tube O-Ring Replacement 1. Loosen screws with a flat screw driver. 2. Remove spring with Needle nose pliers. 3. Remove C-Ring with C-Ring Pliers. 4. Remove valve and tube with needle nose pliers. Back to Top CHICAGO MINNEAPOLIS...

  • Page 16: Piston Replacement

    PHONE 1-800-295-5510 FAX 1-800-295-5571 WEB uline.com Piston Replacement 1. Remove screws & nut with 8 mm Spanner wrench and 4 mm Allen wrench. 2. Remove magazine assembly. 3. Loose set screw with a 3mm Allen wrench to unlock the adjusting rod. 4.

Table of Contents