⚫
Set the record audio volume and then click "Start" to start recording your voice.
⚫
Click "Upload" to upload your customized voice.
3. Select the voice and then set the warning times and volume as needed.
Warning times: it ranges from 1 to 50.
4.
Click "OK" to save the settings.
4.3.7 Light Alarm
Go to Alarm→Light Alarm interface as shown below.
Set the flashing time and frequency of the light.
7
Flashing time: the flashing time ranges from 1 second to 60 seconds.
Flashing Frequency: three options- low, middle and high
7.1 Analytics Configuration
This series of IP cameras supports certain smart functions, such as line crossing detection, region intrusion detection, etc. These
events can be triggered as alarm events.
For more accuracy, here are some recommendations for installation.
Cameras should be installed on stable surfaces, as vibrations can affect the accuracy of detection.
⚫
Avoid pointing the camera at the reflective surfaces (like shiny floors, mirrors, glass, lake surfaces and so on).
⚫
Avoid places that are narrow or have too much shadowing.
⚫
Avoid scenario where the object's color is similar to the background color.
⚫
At any time of day or night, please make sure the image of the camera is clear and with adequate and even light, avoiding
⚫
overexposure or too much darkness on both sides.
7.1.1 Exception
This function can detect changes in the surveillance environment affected by the external factors.
Go to Event→Exception interface as shown below.
6
5
22