Typical Output Characteristics; Firmware Update - Texas Instruments LMX2594PSEVM User Manual

Reference PRO

9.3 Typical Output Characteristics

Figure 9-3. Default Output Phase Nosie

9.4 Firmware Update

Usually when the Reference PRO board is used at the first time, TICS Pro will request for a firmware update.
Simply follow the pop-up instructions to complete the update. This is necessary to ensure that the USB
connection between the PC and the Reference PRO board is properly set up, otherwise the programming to
LMX2594PSEVM will not be successful.
1. When you see this message, press the OK button.
2. Next, follow the on-screen procedure.
18 LMX2594PSEVM Evaluation Instructions
Figure 9-2. Output Termination Schematic
Figure 9-5. Firmware Requirement
Copyright © 2022 Texas Instruments Incorporated
Figure 9-4. Default Output Waveform
www.ti.com
SNAU278 – JULY 2022
Submit Document Feedback