Typical Phase Noise Characteristics - Texas Instruments LMK5B33216EVM User Manual

EVM Configuration

3.10 Typical Phase Noise Characteristics

These plots show the typical phase noise performance for common frequencies outputted from the BAW
(VCO3).
The EVM configuration used to obtain these measurements is as follows:
1. XO frequency = 48 MHz (Onboard TCXO)
2. Outputs were configured as HSDS outputs following the methods described in
Figure 3-12. APLL3 312.5-MHz Phase Noise
Performance
Figure 3-14. APLL3 125-MHz Phase Noise
Performance
14 LMK5B33216EVM User's Guide
Figure 3-13. APLL3 156.25-MHz Phase Noise
Figure 3-15. APLL3 100-MHz Phase Noise
Copyright © 2022 Texas Instruments Incorporated
Section 3.9.
Performance
Performance
SNAU263A – FEBRUARY 2022 – REVISED JULY 2022
Submit Document Feedback
www.ti.com