Table of Contents
Advertisement
HAMAMATSU
Installation
1. Power requirement
The power supply voltage of the C7557 is AC100V to AC240V
(50/60Hz).
2. Fuses
Inspect the fuse before plugging the power cord of the instrument
into an outlet. The two fuses are located in the fuse box (in the
LINE ) on controller rear panel. The fuse is rated at 2.5A.
When replacing the fuse , use only fuse of the same ratings as those
provided.
[Caution]
Using a fuse of a different rating or bypassing the fuse is dangerous and
not recommended.
3. Ground
Connect the power cord plug to a 3-prong power outlet.
MCD CONTROLLER C7557
- 7 -
Chapter1 Hardware
Advertisement
Table of Contents
