Nomenclature - Hamamatsu C7557 Instruction Manual

HAMAMATSU

Nomenclature

Front panel
① POWER
② SIGNAL I/O
③ TE CONTROL I/O
Rear panel
① LINE
② RS-232C
③ SCSI ID
④ SCSI
⑤ TRIG. IN
⑥ PULSE OUT
⑦ VIDEO OUT
⑧ SYNC. OUT
MCD CONTROLLER C7557
Power indicate LED.
Connector for control of a multichannel
detector head.
Connector for cooling control and power
supply for FAN.
Power input connector and power control
switch. "I" means that the system power is
turned on. "O" means that the system
power is turned off.
RS-232C interface for communicating with
a personal computer or a multichannel
detector head.
Dip switch for setting SCSI ID number.
SCSI interface for communicating with an
personal computer.
BNC receptacle for external trigger input.
BNC receptacle for pulse output to drive
external shutter or external lump.
BNC receptacle for video signal output to
observe with an external analyzer(ex.
Oscilloscope).
BNC receptacle for start signal output. It is
synchronized with VIDEO OUT, so that it
is available for trigger to an external
analyzer(ex. Oscilloscope).
- 11 -
Chapter1 Hardware