Table of Contents
Advertisement
HAMAMATSU
Connection
Front panel
① SIGNAL I/O
② TE CONTROL I/O
Rear panel
① LINE
② RS-232C
③ SCSI
④ TRIG. IN
⑤ PULSE OUT
⑥ VIDEO OUT
⑨ SYNC.OUT
MCD CONTROLLER C7557
Connect the "SIGNAL I/O" to multi-
channel detector head "SIGNAL I/O".
Connect the "TE CONTROL I/O" to multi-
channel detector head "TE CONTROL I/O".
Connect power cable provided.
RS-232C interface for communicating with
a personal computer or a multichannel
detector head. Connect to a personal
computer "Serial port" or a multichannel
detector head "RS-232C" with RS-232C
cable.
SCSI interface for communicating with a
personal computer. When single-end used
the C7557, don't open the another port. It
necessary SCSI terminator attached.
Connect
to
an
instrument with BNC-BNC cable.
Connect to an external shutter or an
external lump with BNC-BNC cable.
Connect
to
an
instrument (ex. Oscilloscope).
Connect
to
an
instrument (ex. Oscilloscope).
- 12 -
Chapter1 Hardware
external
measuring
external
measuring
external
measuring
Advertisement
Table of Contents
