Table of Contents
Advertisement
HAMAMATSU
Specifications
A/D conversion part
This is a differential input type high-speed A/D converter. It amplifies and
A/D converts the signal input from various multichannel detectors.
The A/D converters are available 16bits or 12bits.They are switched from
the MDDA software.
Resolution
Conversion speed
Input range
Input format
Nonlinear type linearity
Trigger
Controller
The controller is made up of various multichannel detectors drive circuits,
data storage memory, and computer interface (SCSI interface, RS-232C
interface).
Multichannel detector storage time setting, data transfer, etc. can be easily
performed by issuing commands from an external computer over the SCSI
interface.
Clock
Memory
Interface
MCD CONTROLLER C7557
12bit
1μs/channel
CCD sensor：0 〜 10V
N-MOS sensor：0 〜 10V
InGaAs sensor：-10V 〜 +10V
Differential input
0.1%FS
External input
20MHz
4MB（1024 ch × 2048 lines）
SCSI
- 20 -
Chapter1 Hardware
16bit
4μs/channel
Advertisement
Table of Contents
