Number Of Pixels Control - Hamamatsu C7557 Instruction Manual

HAMAMATSU

Number of Pixels Control

Description
Controls the number of pixels. The return values are 1 with normal
completion, and other than 1 with an error. The number of pixels status
may be obtained as the return value for the function.
Function Name
WORD SetSensorVch (ID, SensorVch);
WORD SetSensorHch (ID, SensorHch);
WORD GetSensorVch (ID);
WORD GetSensorHch (ID);
Format
WORD SetSensorVch (WORD, WORD);
WORD SetSensorHch (WORD, WORD);
WORD GetSensorVch (WORD);
WORD GetSensorHch (WORD);
Arguments
ID
SensorVch
SensorHch
Return Values
For number of pixels control
Same as for CheckSensor function
Status acquisition
Status returned within 0〜65535 range
SCSI ID number
Specify MCD controller SCSI ID number
Set munber of pixels ( vertical )
Set munber of pixels ( horizontal )
Range：0〜65535
HAMAMATSU PHOTONICS K.K.
- 42 -
MCD CONTROLLER C7557
Chapter 2 Software Library