Table of Contents
Advertisement
HAMAMATSU
Specifications
Functions
Data transfer
Exposure time setting
External trigger input
Trigger mode setting
Trigger polarity setting
PULSE OUT setting
VIDEO OUT
SYNC. OUT
AMP GAIN setting
Peltier power supply setting
Sensor head setting
Number of channel setting
Sensor head mode setting
Cooling Control
Temperature data acquisition
MCD CONTROLLER C7557
Transfers the data stored in memory to the
computer.
1ms〜65535ms / 1ms step
BNC receptacle at rear panel.
Internal trigger mode, External trigger
mode, External start mode
Positive, Negative
ON/OFF, Delay time, Pulse width
BNC receptacle at rear panel.
BNC receptacle at rear panel.
x1/2、x1、x2、x5、x10、x20、x50、x100
5V, 6V
CCD、InGaAs、N-MOS
Each
maltichannel
available.
Operation mode, Load mode
The RS-232C interface is available.
Cooling ON/OFF
Converts temperature signal to digital data,
and Transfers the data to the computer.
Resolution of A/D converter is 10bits.
- 21 -
Chapter1 Hardware
detector
head
is
Advertisement
Table of Contents
