Hamamatsu C7557 Instruction Manual page 5

HAMAMATSU
CLEANING
The C7557 does not need to cleaning.
INSTALLATION LOCATION
To ensure the proper operation of the system, avoid installing it in the following
locations:
(1) in areas near strong electric and/or magnetic field sources
(2) in areas at ambient temperatures below 0℃ or above 40℃
(3) in areas subject to large changes in temperature
(4) in areas with high humidity(more than 80%) or damp environments
(5) in areas subject to vibration
(6) in areas with high-density corrosive gases(chlorine, fluorine, etc.)
(7) in areas with excessively dusty environments
(8) in areas exposed to direct sunlight
(9) in areas higher than 2,000 meters above see level
SYMBOLS
The C7557 is marked the symbols below.
"COUTION". To avoid shock or injury, see the instruction manual.
!
ON ( POWER SWITCH )
OFF ( POWER SWITCH )
〜
Alternating Current
MCD CONTROLLER C7557
- 4 -
Chapter1 Hardware