Delay Time Of External Start Control - Hamamatsu C7557 Instruction Manual

HAMAMATSU

Delay Time of External Start Control

Description
When set the external start mode, controls the delay time between TRIG
IN inputs and sensor scan starts. The return values are 1 with normal
completion, and other than 1 with an error. The delay time status may be
obtained as the return value for the function.
Function Name
WORD SetDelayTime (ID, DelayTime);
WORD GetDelayTime (ID);
Format
WORD SetDelayTime (WORD, WORD);
WORD GetDelayTime (WORD);
Arguments
ID
DelayTime
Return Values
For delay time control
Same as for CheckSensor function
Status acquisition
Status returned within 0〜65535ms range
SCSI ID number
Specify MCD controller SCSI ID number
Set delay time ( external start mode )
Range：0〜65535ms
HAMAMATSU PHOTONICS K.K.
- 35 -
MCD CONTROLLER C7557
Chapter 2 Software Library