Timing Chart - Hamamatsu C7557 Instruction Manual

HAMAMATSU

Timing chart

Internal synchronization measurement
When measuring the spectral of a steady light with this system, use internal
synchronization measurement. See timing chart below.
Timing chart of internal synchronization measurement
Timing chart of internal synchronization measurement
[
DATA OUT
START
When the data measurement button START is pressed, the next data are val id.
Method
1) Operation
Measuring the spectral of a steady light
1EVENT
Data measurement button START
press timing
Set Trigger MODE to Internal and the Number of
Cycle from the application software. Next measure
the data using the data measurement function.
- 15 -
MCD CONTROLLER C7557
Chapter1 Hardware
]
Not avairabl e data
Avairabl e data