Hamamatsu C7557 Instruction Manual page 19

HAMAMATSU
Timing chart
Measuring VIDEO signal with oscilloscope
This system outputs a multichannel detector video signal from the "VIDEO
OUT" connector. For trigger of oscilloscope, this system outputs a multi-
channel detector scan start signal from the "SYNC. OUT" connector. See
timing chart below.
Timing chart of VIDEO OUT and SYNC.OUT
VIDEO OUT
SYNC. OUT
Timing chart of VIDEO OUT and SYNC.OUT
SYNC. OUT ou tputs START signal.
- 18 -
MCD CONTROLLER C7557
Chapter1 Hardware