Cable Glands; Conduit Adapters And Cable Glands; Connection Requirements - ABB MagMaster Instruction Manual

...3 ELECTRICAL INSTALLATION
3.2.4 Conduit Adapters and Cable Glands (North American – 0.5in)
Alternative
Face Seal
Face
Seal
Ferrule
Outer Nut
Conduit Adapters
Transmitter
Power
Input/Output
Fig. 3.9 Connection Requirements
8
Hub
Seal
(Present in
O.Z. Gedney
Fittings)
Fig. 3.8 Conduit Adapters and Cable Glands
Sensor
Alternative
Face Seal
Face
Seal
Fittings vary
slightly for
different makes
Outer Nut

Cable Glands

3.3 Connection Requirements

The transmitter and sensor are supplied as a
matched system. Check serial numbers to
ensure they are matched.
3.3.1 Sensors
Remote sensors are usually supplied with an
integral cable and potted connections. If the
sensor has been supplied unpotted, connections
must also be made to the sensor terminal box
and then potted on completion with the supplied
potting material – See Appendix A.
Hub
Illustration
typical for
O.Z.Gedney