Led Description - Queclink GL320M Series User Manual

GL320M Series User Manual

2.3. LED Description

LED
There are three LEDs on GL320M. For details, please see the table below.
LED Device Status
Searching for network
The device has been registered to network.
CELL LED
Power off
SIM-PIN locked
<LED On> is set to 2.
GPS has fixed a position.
GPS is in the process of fixing.
GPS is on and GPS data is wrong.
GPS LED
GPS is off.
150 seconds have passed after power on when <LED On> is
set to 2.
<LED On> is set to 2.
Power on and normal
Charger inserted and charging completed
Charger inserted and charging
Power key is pressed to power off the device.
PWR LED
Abnormal
Power low alert
The power light is turned off by command.
<LED On> is set to 2.
Note: Please refer to GL320M Series @Track Air Interface Protocol for the settings of <LED
On>.
QSZTRACGL320MUM0100
Figure 2. GL320M LEDs
Table 5. GL320M LED Description
LED Status
Fast flash
Slow flash
Dark
Solid
Dark
Solid
Fast flash
Slow flash
Dark
Dark
Dark
Dark
Solid
Fast flash
Fast flash
Fast flash
Slow flash
Dark
Dark
4