Getting Started; Battery Charging; Turning On/Off The Device - Queclink GL320M Series User Manual

GL320M Series User Manual

Getting Started

5.

5.1. Battery Charging

1. Connect AC-DC power adapter to GL320M.
2. Insert the AC-DC power adapter into the power socket.
3. During charging, the PWR LED flashes fast. When the battery is fully charged, the PWR
LED will be always on.
4. You can also charge the battery via USB cable which connects GL320M to the PC.
5. Charging time is about 3.5 hours.
Note:
Before using GL320M for the first time, please fully charge the battery.

5.2. Turning On/off the Device

To turn on the device:
◆
Method 1: Press the Power key at least 3 seconds and then release it to turn on
GL320M. At the same time, PWR LED will also turn on.
◆
Method 2: Connect the device to the charger or external battery. The device will turn
on automatically, and PWR LED will also turn on.
To turn off the device:
◆
Method 1: Press the power key about 2 seconds. PWR LED will flash fast and then turn
off. It indicates that GL320M is turned off. The time needed to power off the device
depends on the quality of the network. The maximum time needed for power off is 90
seconds. This method is only valid for turning off the device when internal battery is
used. Please note the end-user cannot power off GL320M through Method 1 when the
power key is disabled by Protocol.
◆
Method 2: If external battery is used, the device will power off when the external
battery is disconnected.
QSZTRACGL320MUM0100 8