Otto Bock Myo Plus Instructions For Use Manual page 7

3.2 Conditions of use
The product was developed for everyday use and must not be used for unusual activities such as
extreme sports (free climbing, paragliding, etc.). Furthermore, the product must not be used for
the operation of motor vehicles, heavy equipment (e.g. construction machines), industrial
machines, firearms or motor-driven equipment.
The product is intended exclusively for use on one patient. Use of the product by another person
is not approved by the manufacturer.
3.3 Indications
• For patients with unilateral and bilateral amputations.
• For patients with transcarpal and transradial amputation.
3.4 Contraindications
• For patients with transhumeral amputation.
• For patients with partial hand amputation.
• For patients with shoulder disarticulation.
• For patients who are not able to generate an adequately separable pattern.
3.5 Qualification
Fitting a patient with the product may only be carried out by O&P professionals who have been
authorised by Ottobock after completion of a corresponding training course. The O&P profes­
sional also has to have the technical qualifications required for the alignment of a prosthesis with
all required settings and adjustments.
The user must be instructed about the use of the product by authorised, qualified personnel.
The "O&P professional mode" of the adjustment app may only be used by qualified personnel,
therapists and nursing staff after participating in the relevant product training and obtaining certi­
fication for the application. Additional product training courses may become necessary to qualify
for app updates.
4 Safety
4.1 Explanation of warning symbols
Warning regarding possible serious risks of accident or injury.
WARNING
Warning regarding possible risks of accident or injury.
CAUTION
Warning regarding possible technical damage.
NOTICE
4.2 Structure of the safety instructions
WARNING
The heading describes the source and/or the type of hazard
The introduction describes the consequences in case of failure to observe the safety instruc­
tions. Consequences are presented as follows if more than one consequence is possible:
> E.g.: Consequence 1 in the event of failure to observe the hazard
> E.g.: Consequence 2 in the event of failure to observe the hazard
This symbol identifies activities/actions that must be observed/carried out in order to avert
►
the hazard.
7