Integra MAYFIELD Instruction Manual page 6

EN – ENGLISH
Socket
Socket T-Knob
Gear Box
Socket Sha
Figure 2
Figure 3
NOTE:
The Coupler is typically positioned with the Locking Knob
toward the O.R. Table, but may be reversed if necessary.
The Coupler may also be inverted to place the Gear Box
higher if required. (Figure 4)
Locking Knob
Post Screw
Posts
Crossbars
Crank Handle
3. Lock the handles on the O.R. Table to secure the Base
Unit. Slide Coupler to desired location and lock the
Hold Down Screws.
4. In order to raise or lower the Infinity Socket position,
turn the Crank Handle on the Gear Box (Figure 2) clock-
wise or counterclockwise. To make lateral adjustments
slide the Gear Box left or right on the Crossbars. To
secure these positions, tighten the Locking Knob.
The Locking Knob secures the Gear Box from moving
in any direction and prevents the Crank Handle from
movement.
Mount the Headrest to the Coupler
Three styles of headrests are available:
Horseshoe-Adult Horseshoe-Pediatric
(419A1031)
Replacement Gel Pads are available:
Pediatric - Left
Pediatric - Right
Adult - Left
Adult - Right
Mini (for General Purpose)
6
Figure 4
General Purpose
(419A1030) (419A1050)
440C1011 1 ea
440C1012 1 ea
41C1444
41C1445
419A1048 2 ea
1 ea
1 ea