Intermec IP4 Instructions Manual page 7

• The 700 Color must be running one of these operating
systems (OS):
• 4.95.1 or later Prem (Premium)
• 4.96.4 or later GSM Phone
• If the fourth character in the configuration number (CN) of
your IP4 is an "A":
• The 700 Color must be running IVA 4.03.35.1043 or
later.
• Your IP4 must be running firmware version 5.19 or later.
• If the fourth character in the configuration number (CN) of
your IP4 is an "B":
• The 700 Color must be running IVA 4.03.35.1050 or
later.
• Your IP4 must be running firmware version 7.16 or later.
Note: Use Intermec Settings to find the OS and IVA
versions of the 700 Color. For help, see the user's
manual for the 700 Color.
To configure your IP4 as a keyboard wedge
1 Fully charge your IP4 battery and attach your IP4 to a 700
Color.
2 On the 700 Color, start Intermec Settings.
3 Select RFID > Reader 1, and select Enable Reader.
4 Under Reader 1, select Reader Module > Tag Type, and
select the type of RFID tag you are using.
5 From the main Intermec Settings menu, select Device
Settings > Keypad > Scan Button Remapping > Handle
Trigger, and select RFID.
6 Save your settings.
IP4 Portable RFID Reader Instructions 7