Intermec IP4 Instructions Manual page 11

Performance
Specification
RFID tag identification
rate
RFID tag read distance 91 cm (3 ft)
RFID tag data
exchange rates
Firmware Architecture
Specification
Firmware
Protocol/Compatibility ANSI NCITS 256.2000 for API, part 2,
Reader Configuration Access Summary
Function
Change Country
Code
Download updated
firmware
Setup, system
configuration not
secured at higher level,
such as change battery
or wake up default
IP4 Portable RFID Reader Instructions
Value
At least six tags per second with one to ten
tags in the RF field, located at half the
maximum reading distances from the IP4
front panel.
Read a tag containing 8 bytes of data within
50 ms.
Perform a verified write to tag at an average
rate of 75 ms per byte per tag.
Description
Communicates in Basic Reader Interface
(BRI) mode.
part 3-1
Control Mechanism Responsible Party
Hardware key or
configuration tag
Intermec-only
password
Configuration file
Factory or Intermec
Field Technician
Remote or on-site field
technician
Customer System
Administrator
®
11