Prorack PR3097 Installation Instructions

First Time Installation
• Please read instructions carefully before installation.
• Check the contents of kit. Contact your Prorack dealer if any parts appear to be missing or damaged.
• Clean your roof racks and alloy tray prior to fitting the Gas Bottle Restraint.
Important Warning
• It is critical that all Prorack racks and accessories be properly and securely attached to your vehicle. Improper
attachment could result in an automobile accident, and could cause serious bodily injury or death to you or to others.
• You are responsible for securing the racks and accessories to your car, checking the attachments prior to use, and
periodically inspecting the products for adjustment, wear, and damage.
• If you do not understand all of the instructions and cautions, or if you have no mechanical experience and are not
thoroughly familiar with the installation procedures, you should have the product installed by a professional installer
such as a roof rack specialist.

Kit Contents

Item Component
1 T-Slot M6 x 35 mm Bolt
2 M8 x 35 x 3 mm Washer
3 Knob with M6 Nut
1
09-13-520 PR3097 Rev2
Roofbox T-Bolt Kit
Qty
4
4
4
2w
3
Page 1 of 3