Mechanical Attachment Bracket - Volvo EC60E Operator's Manual

Operating techniques
202

Mechanical attachment bracket

1 Front hook
2 Rotating hook
3 Locking pin
4 Linch pin
5
6
5 Front bucket pin
6 Rear bucket pin
Mechanical attachment bracket
Mechanical attachment bracket
Bucket installation with mechanical
attachment bracket
WARNING
The attachment quick coupler may be open
regardless of what is indicated by the alarm signal
or on the instrument panel. Therefore, always check
that the attachment quick coupler is locked
securely. Also read the instructions in the operator's
manual.
NOTICE
Check that the attachment is locked securely by
pressing the front edge of the attachment against
the ground so that the machine's front end is raised
slightly.
1 Remove linch pin (4) and extract locking pin (3).
2 Rotate the locking pin 90° to lock it in extracted
position.
3 Lower the dipper arm into a position where the
attachment bracket connects with front bucket
pin (5).
4 Lower the attachment bracket towards rear
bucket pin (6). Tilt the bucket rearwards (bucket
in) until the hook on the attachment bracket is
properly connected to the rear bucket pin.
5 Check that the bucket is securely fastened by
simultaneously pressing the bucket to the
ground and forward.
6 Lower the bucket to the ground.