Operation Procedure; Preparatory Examination Of The Product; Precautions During The Laser Operation - JPT YDFLP Installation Manual And User's Manual

YDFLP Fiber Laser Installation
Guide and User Manual

4. Operation Procedure

4.1 Preparatory examination of the product

1）Check the laser casing and the fiber cable for any unexpected conditions;
2）Check the connection between laser system and the fiber laser module, and tighten the
connection cable.
4.2 Operation Procedure
1）Power on the system
Turn on the fiber laser at the same time or after turning on the marking machine. Wait for about
12s before using the laser.
2）Procedures for laser marking
To test the fiber laser, firstly please set the power to 0% and draw a simple figure using the laser
marking software, drive the marking and observe the laser output using the laser test plate. Then
gradually increase the laser power and change the settings for the marking process. Under
normal circumstances, the laser output should be stronger and stronger on laser test plate; If not,
turn off the machine and check it.

4.3 Precautions during the laser operation

1）Wear laser safety glass.
2）Please stop the laser processing before turning off the fiber laser.
File Number: EFLP001-B-E Shenzhen JPT Opto-electronics Co. Ltd. Version : V05 Date:2017
15