Laser System Setting; Laser Working Status Monitoring - JPT YDFLP Installation Manual And User's Manual

YDFLP Fiber Laser Installation
Guide and User Manual

5.2.3 Laser System Setting

Laser-SYS for JPT engineer to set laser system parameters, it need right password to input any
parameter change.Not open to customers in current version.

5.2.4 Laser Working Status Monitoring

From Laser_STA, parameters and alarms can be monitored. Every time when laser is switched
on, the times of alarms saved in the system will be sent to GUI automatically.
The DB25-D0,D3,DB25-D7,DB25-PA,DB25-MO to display the DB25 power received from
laser,The status of port PA,MO,light on when high level,light off when low level,
PulseWidth,PRR to display the laser working pulse width and frequency,
LASER_POWER to display the value of the pump current/energy in percentage
Download link: http://jptoe.com/en/down_273_273.html
If sn code final number is 1,pls download version 1.1
If sn code final number is 2,pls download version 2.
File Number: EFLP001-B-E Shenzhen JPT Opto-electronics Co. Ltd. Version : V05 Date:2017
20