Product Introduction; Product Description; Packaging List; Operation Conditions And Safety Instructions - JPT YDFLP-E-20-M7-S-R User Manual

1. Product Introduction

1.1 Product Description

JPT M7 Series fiber laser control with standard DB25 interface and powered with 24V DC.
It is designed for high-speed and precise marking application. The pulse response and
performance are much better comparing to similar products. Significantly compact size is ideal
for small marking system.
Photographs of typical M7 type fiber lasers are shown in Fig.2 ( For the specific appearance,
please refer to the appearance of the product shipped):

1.2 Packaging List

1.3 Operation Conditions and Safety Instructions

Please read the following instructions carefully. Product reliability and lifetime probably be
affected if not following the user manual.
1.3.1. Make sure that the 24VDC power supply is connected in the correct way. Wrong
connection or input voltage might damage the product.
Figure 2 YDFLP-E-20/30-M7-S-R Physical Picture
Table 2 Packaging List of YDFLP
Items
Fiber Laser Source
Specification List(tested)
Packing List
Precautions
4
YDFLP-E-20/30-M7 User Manual
Quantity
1
1
1
1
File Number: J-SI-0036