Installation Procedures - JPT YDFLP Installation Manual And User's Manual

2.2 Installation Procedures

1) Fix the laser module onto the mounting panel; make sure enough air gaps around the laser
module for sufficient air flow.
2) Connect the power cables with the 24V DC power supply correctly according to the color
code, i.e. Red: DC positive, Black: DC negative and Olivine: GND).
3) Ensure that the control interface of the external controller can match the laser, and then
connect the control cable to the laser and fix it.
File Number: EFLP001-B-E
LP series 60W
Firgure 6 fiber cable length
Figure 7 Color code of the power supply cable
Shenzhen JPT Opto-electronics Co. Ltd.
YDFLP Fiber Laser Installation
11
Guide and User Manual
3 0 0 0
Version : V05 Date:2017