Flap Servo Installation - H-KING Savage Bobber 1000 mm 5ch ARF Version Instruction Manual

FLAP SERVO INSTALLATION:

Repeat the above steps for the flap servo installation.
COCKPIT WINDSHIELD INSTALLATION:
Install the factory pre-cut PVC windshield onto the fuselage cockpit area. Use masking tape to hold
the windshield in place on the cockpit frame as shown in the pictures, do this on both sides. Ensure
the PVC sheet is evenly positioned on the turtle deck in front of the cockpit. Adjust the windshield
as necessary to achieve the best fit.
8