Remove/Replace Club Gear Transfer Belt - Prince Castle DCFT-MCD Series Service Manual

Unplug the unit.
1
Failure to disconnect power
from the unit before servicing
could result in severe bodily
injury or death. The ON/OFF
Switch does not disconnect
incoming power to the unit.
Open front door.
2
Remove left side panel by loosening the thumb screw.
3
Open the club latch.
4
Lift tensioner arm.
5
Slide off club belt.
6
Repeat steps 5 and 6 for other belt.
7
Use the 11/32" nut driver to remove front cover top nut.
8
527-504revM_EN

Remove/Replace Club Gear Transfer Belt

WARNING
Use flathead screwdriver to remove bottom front cover
9
screw.
Pull out front cover.
10
Open back door.
11
Use the 11/32" nut driver to remove back cover top
12
nut.
Use flathead screw driver to remove back cover
13
bottom flathead screw.
Pull out back cover.
14
29
Vertical Toaster
DCFT-MCD Series
Printed in USA 12/20 © 2020