Remove/Replace Rear Club Probe - Prince Castle DCFT-MCD Series Service Manual

Unplug unit.
1
Failure to disconnect power
from the unit before servicing
could result in severe bodily
injury or death. The ON/OFF
Switch does not disconnect
incoming power to the unit.
Refer to club removal. Page 25.
2
Remove (2) flathead screws, which will detach the
3
harness.
Using a 5/16" nut driver, remove (4) bolts.
4
527-504revM_EN

Remove/Replace Rear Club Probe

WARNING
Using a ring tool, remove ring from gear.
5
Remove the rear club half.
6
Remove top (2) 5/64" bolts from rear.
7
Lift up platen, and remove bolt to reveal the probe.
8
41
Vertical Toaster
DCFT-MCD Series
Printed in USA 12/20 © 2020