Vertical Toaster
DCFT-MCD Series
Depending on toaster use, the club belts should be
replaced approximately every 6 months. Belts should be
replaced if worn or torn.
Turn toaster OFF and
1
unplug toaster.
Put on a pair of high temperature gloves.
2
Remove top cover. Loosen thumbscrew on left side
3
panel. Pivot club door to expose machinery inside.
Printed in USA 12/20 © 2020
Remove/Replace Club Belts
12
Pivot latch arm and secure in metal clip.
4
Remove belt tension by
5
pivoting tension arms up.
Remove old belts.
6
Install new belts.
7
527-504revM_EN