How To Change The Door Opening - Caple W16135 Instruction Manual

Undercounter wine cabinet

Table of Contents

H O W T O C H A N G E T H E D O O R O P E N I N G

This appliance has reversible doors but is delivered with a right hinged door. The left hand

hinge kit comes with the unit (in the box), should you wish to reverse the hinge on your unit

follow the directions below:

1. Open the door to 90 degrees, take out 2 screws (2) from low

1. Open the door to 90 degrees, take out 2 screws (2) from lower door axis (3), remove the door (4),

1. Lower hinge (Right)

then pull out the door and door axis (Fig. A).

4. Door

2. Put the door down safely and take out the plug (12) from top of door frame, unscrew 1 screw

7. Top hinge (Left)

(11) at bottom and remove the door limit device (10), then install the door limit device (10) at top

2. Put the door down safely and take out the plug (12) from to

10. Door limit device

of door frame, please use spare plug (12) to block the hole at top of door frame. (Fig. A/B)

3. Take out 3 hinge screws (6) from top hinge (right) (5) and remove it. (Fig. C)

(11) at bottom and remove the door limit device (10), then i

3. Take out 3 hinge screws (6) from top hinge (right) (5) and remove it. (Fig. C)

4. Remove decorative nail (8) from left top of cabinet and install spare top hinge (Left) (7) at left top

of door frame, please use spare plug (12) to block the hole a

of cabinet with 3 screws. (Fig. D)

Please keep this instruction manual for future reference

5. According above procedure, install spare lower hinge (left) (9). (Fig. E)

2 . Screws

5. Top hinge (Right)

8. Decorative plugs

11. Screw

Instruction manual Wi6135 Wi6135GM Wi6136

3 .Door axis

6. Hinge Screws

9. Lower hinge (Left)

12. Plug

Table of Contents

Wi6135gm Wi6136