How To Change The Door Opening - Caple Wi6117 Instruction Manual

How to change the door opening

This appliance has reversible doors but is delivered with a right hinged door. The left hand hinge kit
comes with the unit (in the box), should you wish to reverse the hinge on your unit.
1. Lower hinge (Right)
4. Door
7. Top hinge (Left)
10. Door limit device
1. Open the door to a 90 degree angle, take out the 2 screws (2) from lower door axis (3), remove
the door (4), remove the axis plate (3) from the door, (Fig. A).
2. Unscrew the screw (11) located underneath the door frame and the limit device (10), and relocate
it at left end side of the door frame. (Fig. A/B)
3. Take out the 3 hinge screws (6) from the top hinge (right) (5) and remove it. (Fig. C)
4. Remove the decorative nails (8) from left top of cabinet and install spare top hinge (Left) (7) at the
top left of the cabinet with 3 screws. (Fig. D)
5. Following the above procedure, install the spare lower hinge to the left (9). (Fig. E)
6. Install the door once correctly aligned.
Insert the decorative nails to cover the holes (8).
7.
2 . Screws
5. Top hinge (Right)
8. Decorative nail
11. Screw
3 .Door axis
6. Hinge Screws
9. Lower hinge (Left)
7