How To Change The Door Opening - Caple Wi3118 Instruction Manual

How to change the door opening

This appliance has reversible doors but is delivered with a right hinged door. The left hand hinge kit comes with
the unit (in the box), should you wish to reverse the hinge on your unit follow the directions below:
1. Lower hinge (Right)
4. Door
7. Top hinge (Left)
10. Door limit device
1. Open the door to a 90 degree angle, take out the 2 screws (2) from lower door axis (3), remove the door
(4), Remove the axis plate (3) from the door, (Fig. A).
2. Unscrew the screw (11) located underneath the door frame and the limit device (10), and relocate it at left
end side of the door frame. (Fig. A/B)
3. Take out the 3 hinge screws (6) from the top hinge (right) (5) and remove it. (Fig. C)
4. Remove decorative nail (8) from left top of cabinet and install spare top hinge (Left) (7) at left top of cabinet
with 3 screws. (Fig. D)
5. Following the above procedure, install the spare lower hinge to the left (9). (Fig. E)
6. Install and align the door.
7. Insert the plastic caps to cover the hinge fixing holes (8).
2 . Screws
5. Top hinge (Right)
8. Decorative nail
11. Screw
3 .Door axis
6. Hinge Screws
9. Lower hinge (Left)
7