Table of Contents
Advertisement
How to change the door opening
This appliance has reversible doors but is delivered with a right hinged door. The left hand hinge
kit comes with the unit (in the box), should you wish to reverse the hinge on your unit.
1. Lower hinge (Right)
4. Door
7. Top hinge (Left)
10. Door limit device
1. Open the door 90 degrees and take out the 2 screws (2) from lower door axis (3), remove the door
(4), then pull out the door and door axis (Fig. A).
2. Store the door (4) safely and take out the plug (12) from top of door frame, unscrew 1 screw (11)
at bottom and remove the Door limit device (10), then install the Door limit device (10) at top of
door frame, please use spare plug (12) to block the hole at top of door frame. (Fig. A/B)
3. Take out the 3 hinge screws (6) from the top hinge (right) (5) and remove it. (Fig. C)
4. Remove the decorative nails (8) from the top left of the cabinet and install the spare top hinge
(Left) (7) at the top left of the cabinet with 3 screws. (Fig. D)
5. Following the above procedure, install the spare lower hinge (left) (9). (Fig. E)
6. Turn the door 180 degrees, install the door the same way it was removed and fix the door once
correctly aligned.
7. Block the hole at top right of the cabinet with the spare decorative nails (8).
2.Screws
5.Top hinge (Right)
8.Decorative nail
11.Screw
3 .Door axis
6. Hinge Screws
9. Lower hinge (Left)
12. Plug
7
Advertisement
Table of Contents
