1. Open the door to 90 degrees, take out 2 screws (2) from lower door axis (3), remove the
door (4), then pull out the door and door axis (Fig. A).
2. Put the door down safely and take out the plug (12) from top of door frame, unscrew 1
screw (11) at bottom and remove the door limit device (10), then install the door limit
device (10) at top of door frame, please use spare plug (12) to block the hole at top of
door frame. (Fig. A/B)
3. Take out 3 hinge screws (6) from top hinge (right) (5) and remove it. (Fig. C)
4. Remove decorative nail (8) from left top of cabinet and install spare top hinge (Left) (7) at
left top of cabinet with 3 screws. (Fig. D)
5. According above procedure, install spare lower hinge (left) (9). (Fig. E)
6.
The door revolves 180 degrees, install the door with same way it was removed and fix it
with door aligned.
7. Block the hole at right top of cabinet with spare decorative plugs (8).
16 Instruction manual Wi6135 Wi6135GM Wi6136
Please keep this instruction manual for future reference