Table of Contents
Advertisement
How to change the door opening
This appliance has reversible doors but is delivered with a right hinged door. The left hand
hinge kit comes with the unit (in the box), should you wish to reverse the hinge on your unit
follow the directions below:
HOW TO CHANGE THE DOOR OPENING
This appliance has reversible doors but is delivered with a right hinged door. The
1. Lower hinge (Right)
4. Door
left hand hinge kit comes with the unit (in the box), should you wish to reverse the
7. Top hinge (Left)
hinge on your unit follow the directions below:
10. Door limit device
1. Open the door to 90 degrees, take out 2 screws (2) from lower door axis (3), remove the door (4),
1. Open the door to 90 degrees, take out 2 screws (2) from lower door axis (3),
then pull out the door and door axis (Fig. A).
2. Put the door down safely and take out the plug (12) from top of door frame, unscrew 1 screw
remove the door (4), then pull out the door and door axis (Fig. A).
(11) at bottom and remove the door limit device (10), then install the door limit device (10) at top
2. Put the door down safely and take out the plug (12) from top of door frame,
of door frame, please use spare plug (12) to block the hole at top of door frame. (Fig. A/B)
3. Take out 3 hinge screws (6) from top hinge (right) (5) and remove it. (Fig. C)
unscrew 1 screw (11) at bottom and remove the door limit device (10), then
4. Remove decorative nail (8) from left top of cabinet and install spare top hinge (Left) (7) at left top
install the door limit device (10) at top of door frame, please use spare plug (12)
of cabinet with 3 screws. (Fig. D)
to block the hole at top of door frame. (Fig. A/B)
5. According above procedure, install spare lower hinge (left) (9). (Fig. E)
6. The door revolves 180 degrees, install the door with same way it was removed and fix it with door
3. Take out 3 hinge screws (6) from top hinge (right) (5) and remove it. (Fig. C)
aligned.
7. Block the hole at right top of cabinet with spare decorative plugs (8).
4. Remove decorative nail (8) from left top of cabinet and install spare top hinge
(Left) (7) at left top of cabinet with 3 screws. (Fig. D)
5. According above procedure, install spare lower hinge (left) (9). (Fig. E)
6. The door revolves 180 degrees, install the door with same way it was removed
and fix it with door aligned.
7. Block the hole at right top of cabinet with spare decorative plugs (8).
Wi3122_Wi3122WH Wine Cabinet manual.indd 13
2 . Screws
5. Top hinge (Right)
8. Decorative plugs
11. Screw
1. Lower hinge (Right)
4. Door
7. Top hinge (Left)
10. Door limit device
7
Instruction manual Wi3122 & Wi3122WH
3 .Door axis
6. Hinge Screws
9. Lower hinge (Left)
12. Plug
2 . Screws
5. Top hinge (Right)
8. Decorative plugs
11. Screw
Please keep this instruction manual for future reference
3 .Door axis
6. Hinge Screws
9. Lower hinge (Left)
12. Plug
13
24/10/2016 10:05
Advertisement
Table of Contents
