Advertisement
Upgrade the Portable Printer
1. Use the Phillips screwdriver to remove the old terminal holder from the
2. Detach the old terminal holder cables from the printer control panel, then
1
Position New Terminal Holder
Pull the new terminal holder cables through the printer frame, then position the
terminal holder on the printer screw holes.
printer. Pull the slide retainer back to reveal the two concealed screws.
Discard all four screws.
discard the old terminal holder.
2
Removing Old Terminal Holder
Positioning New Terminal Holder
1. Slide retainer
2. Terminal holder
3. Control panel
Figure 11
1
2
1. Cables through printer frame
2. Terminal holder in position
Figure 12
4820 Printer Terminal Holder Upgrade Instructions
3
9
Advertisement
