Advertisement
Test Printer and Old Terminal Holder
Before you dismantle the 4820 Printer, insert an Intermec 62XX Computer in
the old terminal holder, then perform a print test to ensure that both the printer
and the terminal holder are in working order. Troubleshoot any problems before
continuing with this upgrade. Contact the Intermec Customer Support Center if
you have any questions.
Remove the Pivot Frame
" NOTE:
Disable power to the 4820 Printer before dismantling the printer.
1. Remove the lid from the printer, unlatch the pivot frame, and remove any
2. Detach the two flex cables from the back of the control panel, then pull the
3. Detach the 13-conductor flex cable from the pivot frame and discard it. Put
paper from the paper tray.
pivot frame up and out of its hinges.
the pivot frame and remaining 14-conductor flex cable aside for later.
If you are upgrading a 4820 Fixed-Mount Printer, go to page 4.
"
If you are upgrading a 4820 Portable Printer, go to page 9.
"
4820 Portable Printer
1
2
1. 13-conductor flex cable (dispose)
2. 14-conductor flex cable (keep)
3. Pivot frame
4. Hinges
5. Control panel
Removing Pivot Frame
5
Figure 1
4820 Printer Terminal Holder Upgrade Instructions
4820 Fixed Mount Printer
1
2
3
4
3
Advertisement
