Advertisement
Connect Cables
1. Insert the male ground connector (terminal holder ground cable) into the
2. Connect the terminal holder ribbon cable with the I/O extension cable.
Store Excess Cables
Insert all excess ground and ribbon cabling in the channel between the printer
frame and the paper tray.
6
4820 Printer Terminal Holder Upgrade Instructions
female ground connector (printer ground cable). Use needle-nosed pliers, if
necessary.
Close the clasps on the I/O extension connector to secure the two cables.
Ground Connectors
2
1
1. Female ground connector (printer cable)
2. Male ground connector (terminal holder cable)
3. Joined connectors
4. Clasp
Connecting and Securing Cables
Moving Excess Cabling out of Paper Path
3
Figure 6
1. Paper tray
2. Channel
3. Printer frame
Figure 7
Ribbon Connectors
1
2
3
4
Advertisement
